G2 Series
C-Frame Double Crank Power Presses
The G2 series punch press is designed for structural optimization, significantly enhancing the precision of stamped products and effectively extending the lifespan of dies.
It features an integrated welded frame that eliminates internal stress, providing a highly rigid punch press.
Fixed dual-button control station | 6-digit stroke counter |
Programmable Logic Controller (single PLC) with HMI interface
| 6-digit pre-set counter |
Operation mode selection
| 4-digit maintenance counter (unit: ten thousand) |
Hydraulic overload protection device | 10-digit life counter |
Second-stroke protection device | 3-digit cutting counter (can be changed to air blowing device) |
Electrical cabinet door power-off switch | Electronic cam switch (with 6 positions reserved) |
Dual-channel solenoid valve | Air blowing device 3/8" (one circuit) |
Reserved photoelectric safety device circuit | Misfeed detection socket (two circuits) |
Power socket (customer-supplied power) | Electric slide adjustment device |
Digital die height indicator (unit: 0.1mm) | Inverter and main motor reverse device |
Manual grease lubrication device |
|
Die cushion device | Flywheel brake device |
Photoelectric safety device | Feed shaft end
|
Top material feeding device for slide | Quick Die Change System (Q.D.C.) |
T-type worktable | Foundation screws and foundation plate |
Safety blocks and safety pins | Anti-vibration rubber pad |
Attached misfeed dual-channel solenoid valve | Anti-vibration mechanical feet |
Cutting counter 3 digits | Die illumination light |
-
-
-
-
ST1 series + trolley
Straight column type single crankshaft precision punch press + trolley
It can be widely used in forging processes such as drawing, bending, engraving, flattening and trimming, and can perform single-action or continuous stamping.
-
-
