The design of the link drive mechanism allows the slider to move vertically at the optimal forming speed.
When the slider descends into the processing zone, its movement speed slows down, reducing the impact on noise and vibration, thereby enhancing the quality of the working environment.
Compared to traditional crankshaft types, the slider's return speed is faster, resulting in a 1.2 to 1.4 times increase in processing efficiency for the same processing speed.
| Standard Accessories | |
| Fixed dual-hand button control panel | 6-digit cumulative counter |
|
Punch press controller (PLC + color human-machine interface)
|
6-digit preset counter |
|
Operation Modes Single/Inch/Safety single stroke/Continuous |
6-digit maintenance counter |
| Hydraulic overload protection device | 12-digit life counter |
| Second fall protection device | Electronic rotary cam switch with 6 presets |
| Dual solenoid valve | Air blow device 3/8" one circuit |
| Electric slider adjustment device | Air source connector 3/8" one circuit |
| Digital die height indicator | Misfeed detection socket |
| Electric grease lubrication device | Power socket (only for single-phase 110v) |
| Optional Accessories | |
| Die cushion device | Cutting counter 3 digits |
| Photoelectric safety device | Flywheel brake device |
| Slider upper material feeding device |
Feed shaft end
|
| Main motor reverse device | Quick die change device |
| Foot pedal switch | Base screws and base plate |
| Safety block and safety pin | Anti-vibration mechanical feet |
| Attached detection dual battery valve | Mold illumination light |
| GL1-80 | GL1-110 | GL1-160 | GL1-200 | |||||
|---|---|---|---|---|---|---|---|---|
| B | D | B | D | B | D | B | D | |
| Capabilities-ton | 80 | 110 | 160 | 200 | ||||
| Capacity envelope-mm | 5 | 5 | 6 | 6 | ||||
| Stroke length-mm | 10 | 160 | 110 | 180 | 130 | 200 | 150 | 200 |
| Strokes per minute (fixed)-S.P.M. | 60 | 50 | 45 | 35 | ||||
| Strokes per minute (variable)-S.P.M. | 55-110 | 40-75 | 50-100 | 30-65 | 40-85 | 25-50 | 35-70 | 20-45 |
| Maximum die height-mm | 300 | 330 | 320 | 350 | 350 | 450 | 410 | 450 |
| Table area-mm | 1000x460 | 1000x600 | 1150x520 | 1150x680 | 1250x600 | 1250x760 | 1400x680 | 1400x820 |
| Slide bed area-mm | 560x460 | 650x520 | 700x580 | 850x650 | ||||
