This series can be widely used in processes such as stretching, bending, embossing, flattening, and shearing in the forging and stamping industry. It is capable of both single and continuous punching operations.
The product is equipped with a high-performance wet clutch, making it a high-value green energy product with features such as environmental friendliness, high efficiency, high torque, and low wear.
| Standard Accessories | |
| T-type worktable | Accumulative counter 6 digits |
Punch press controller (PLC + color HMI)
|
Pre-set counter 6 digits |
| Operation mode selection: Cut / Inch / Safe Single Stroke / Continuous | Maintenance counter 4 digits (unit: ten thousand) |
| Hydraulic overload protection device | Life counter 10 digits |
| Second-stroke protection device | Electronic rotary cam switch with 6 positions |
| Electrical cabinet door power-off switch | Air blowing device 3/8” |
| Dual-channel solenoid valve | Air supply connector 3/8” |
| Electric slide adjustment device | Misfeed metal socket |
| Main motor forward and reverse device | Power socket 110V or 220V single phase (customer-supplied power) |
| Electronic die height indicator (unit: 0.1mm) | Rear safety door |
| Electric grease lubrication device | |
| Optional Accessories | |
| Top material feeding device for slide | iForming intelligent monitoring system |
| Safety blocks and safety pins | Quick Die Change System (Q.D.C.S.) |
| Attached misfeed dual-channel solenoid valve | Anti-vibration device |
| Cutting counter 3 digits | Die illumination light |
| Flywheel brake device | Foot switch (with affidavit) |
| Load detection safety device (displayed on HMI) | Fixed worktable |
| Auto-adjusting electronic die height indicator | Remote sales and service |
